Основания Weaver для Browning BAR Warne A996M, алюминий (черный)

Maxima A996 Browning BAR The Maxima Aluminum Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today. The low profile of the Maxima Aluminum Bases give your firearm a sleek look. When used in conjunction with Warne Maxima QD Rings, the shooter is able to utilize the open sights by looking over the top of the bases without sacrificing the normal shooting position behind the firearm. These bases also offer a full width recoil slot in each base. This feature allows the recoil control keys of Warne Rings to attain maximum bearing surface. Features Low profile design allows use of iron sights when optics are removed. Full width and depth recoil slots provide maximum bearing surface for recoil key engagement. Bases securely mount to your firearm with Torx-style T-15 socket cap screws, 25 in/lb. of torque is recommended. Instructions Visually inspect your firearm's receiver for burrs around the screw holes and remove if necessary. Remove all oil and grease from the holes in the receiver, the base screws and contact surfaces. Place the scope mount base(s) on the receiver. Check for proper fit and alignment. Using a T-15 wrench (supplied with WARNE rings) loosely install the supplied Torx 15 screws. If base(s) fit properly, firmly tighten screws.* WARNE recommends 25 in/lb torque. *WARNE recommends the use of a REMOVABLE thread locking compound for best results.