Compact in size, big on features. The March 3x-24x

• First Focal Plane (FFP) reticle with 8x zoom ratio.  The highest zoom ratio in the world. Mil-rad or MOA versions.
• The m-rad reticle or MOA reticle scale value remains constant across the entire zoom range.
• M-rad version - 28 Mil elevation and 28 Mil windage adjustment. One turn is 10 mil-rad. One click is 1/10th mil-rad.
• MOA version - 100 moa elevation and 100 moa windage adjustment for minute of angle models. One turn is 25 moa. One click is 1/4 moa 
• Side focus/parallax adjustment from 10 yards to infinity. 
• Compact Overall size with Long eye relief and 30mm main tube design.
• Tactical turrets with zero set facility on elevation. Zero set is inside elevation and cannot be accidentally changed. See special note about Zero Set facility *
• Choice of illuminated or non illuminated glass etched reticles.
• Supplied with Sunshade, leather lens covers and plastic lens covers. Tactical Flip covers for 2014
• Reticles: FML and FML-1 for mil Radian. For Minute of Angle FMA-1 and FMA-2 (only available in non illuminated model)

March-F  3-24 x 42mm  Compact Zoom Scope (First Focal Plane)

This zoom scope has an 8x magnification ratio, which is the highest magnification ratio in a FFP (first focal plane) configuration rifle scope made to date.  It is easy to range a target without thinking about where to set the zoom range. Target ranging is accurate at any power. This 3x-24x Compact model comes in two versions. The Mil Radian (Mil) and the Minute of Angle (MOA). The short compact overall size yet strong build quality as you would expect from a MARCH scope.

It comes in illuminated and non-illuminated versions. Standard and Low illumination modules are available. Both modules provide four levels of reticle intensity (red) and can be cycled by simply pressing the pressure switch within the focus dial on the left side. Very effective feature at dusk or when aiming at a dark target. If illumination is not activated the reticle remains black as per the non illuminated model. Additionally, with the capability to set any position as the zero point in the elevation (0 - set feature), the shooter will never lose their starting calibration

First Focal Plane design allows the scaling on the FML-1 or FMA-1 reticle to remain constant across the entire zoom range, however the reticle scale will get thicker when the magnification is increased. But the special reticle design in the March FFP scopes allows target acquisition at both low and high magnification levels. The special FMA-2 reticle is a very fine lined reticle and therefore only available in the non illuminated model.

 * Special note about Zero set facility.

The Zero set or "0- set" facility is designed to work in the lower half of the total range of elevation adjustment. Actually it will work from approx 10 moa above centre to the bottom of the adjustment range on this model. Zero set is handy so that you can return to a set point especially after using the dial for long range shooting. You may have wound the dial a long way and want an easy way to come back to a pre-set stop. Anyone shooting long range should be utilizing a mounting system to forward slope for the scope regardless which keeps the optical centre of the scope approximately in the middle of the total adjustment which will be utilized. For example a 20 moa or 30 moa rail. This is what the zero set feature is designed to work with but it may not work with a 0 slope rail or mount system depending on the functions of the rifle out of the control of a scope manufacturer.