Насадка ночного видения для оптических прицелов ЕЕ 1/3.5х14 U ROS НН-1К

The EE 1/3.5х14 U optical sight of ‘Eagle eye’ series is designed for observation and precise aiming when firing and set on any sporting, hunting and air weapons for cartridges of different calibre, having the necessary fitting place. The typical peculiarity of «Eagle eye» series sights is that the shooter sees two images of a target simultaneously: introduced into an upper part of the field of view of the sight is a sector in which a central part of the field of view is magnified by 3.5 times, i.e. the shooter can examine closely an object arranged in the centre of field of view and survey a wide space around the target. The optical sight can be set on both Picatinny and Weaver rail. To set the optical sight on Weaver rail change anchor pins of bracket in the optical sight on those which is included in complete set. The optical sight ensures more accurate aiming as it enlarges the target image and when aiming at a target there is no parallax inherent to iron sights, i.e. the target and the aiming reticle are seen equally sharp. Thanks to sealing rubber cuffs, the device has an increased moistureproofness. To prevent condensation the inner cavities of the optical sight filled with nitrogen. To protect external optical surfaces flip plastic covers are put on the objective and the eyepiece which are quicky opened by one pressing if required. The operating temperature range of the sight is from - 45° to 50° С

The EE 1/3.5х14 U sight is a a sophisticated opticalmechanical system having two optical channels with 1x and 3.5x magnifications, elevation and windage adjustments and focusing of the eyepiece according to the peculiarities ofthe observer`s eye. The optical sight has an eyepiece adjustment within ±3 diopters for improving the image sharpness according to the peculiarities of the shooter`s eye. The adjustment is carried out by moving the eyepiece dioptre adjustment ring. The necessary position of the eyepiece is fixed with locking ring (in primary position the eyepiece is adjusted at 0 (zero) dioptre). Arranged in the focal plane of the objective is an aiming reticle (Fig. 2). The reticle has horizontal and vertical hairlines. The length between vertical hairlines is equivalent to 1 mil and between horizontal hairlines is equivalent to 2 mil. Applying of more accurate ballistic corrections can be performed by elevation and windage turrets. When reticle illumination is on, illuminated ring in diameter of 10 mil in field of view centre and sharply illuminated outlined dot in the centre of the illuminated ring have appeared. Reticle has eleven levels of brightness and used as the addition to the main reticle in insufficient light condition. To replace the battery element the upper lid of the switch should be twisted off, the decay power element extracted and on its place the new one replaced with flat side (+) faceup. In the sight can be used disk cell lithium element of type CR2032 with voltage 3V or its analogues DL2032, 5004LC, E-CR2032.