Средство для чистки оружия, сольвент Rimfire Blend Bore Tech, 120 мл, BTCF-17004 (для мелкокалиберного оружия)

Bore Tech Rimfire Blend Bore Cleaner is a specialty, cutting edge bore cleaner that is 100% barrel safe, biodegradable and easily outperforms the competition without any hazards, toxicities or odors. Rimfire Blend rapidly removes the carbon, lead and bullet wax fouling produced by Rimfire ammunition. Bore Tech’s Rimfire Blend Bore Cleaner is a specially formulated bore cleaner that effectively cleans lead, powder fouling and bullet wax with ease. Rimfire Blend surpasses the rigorous demands of today’s smallbore shooters and has become the cleaner of choice for both world renowned competition shooters and rifle manufactures. Rimfire Blend’s proprietary formulation utilizes a combination of chemicals that contains no ammonia, no offensive odors and is 100% biodegradable. It has the ability to simultaneously cut through the layers of lead, wax and carbon fouling and buildup found on barrel walls. RIMFIRE BLEND QUICKLY REMOVES CARBON WAX LEAD CORROSIVE RESIDUE RIMFIRE BLEND IS 100% BARREL SAFE NON HAZARDOUS AMMONIA FREE ODOR FREE BIODEGRADABLE USER FRIENDLY Rimfire Blend uses an exclusive blend of surfactants, penetrants and releasing agents to penetrate and lift lead fouling off of the barrel’s surface. This technology allows the chemical to perform all the “grunt” work, allowing for minimal time spent brushing and patching. The proof is on the patch, so do not be surprised when you see strands and flecks of lead fouling coming out the end of your bore! Rimfire Blend is another addition to Bore Tech’s specialty, cutting edge bore cleaning line. Are your firearms Bore Tech Rimfire Blend clean? Bore Tech - Redefining Gun Care Proudly made in the USA Bottle Type Treated HDPE Plastic Cap Type Twist Open/Close Dispensing Cap w/ foam gasket seal 100% Barrel Safe Odor Free Non-Hazardous 100 % Biodegradable Contains No Ammonia Short Term Rust Preventative Non-Flammable Bore Tech Rimfire Blend Use Instructions UNLOAD FIREARM 1) Wet 3 to 4 Bore Tech X Count patches with Rimfire Blend and individually push through bore to remove loose fouling. Only push patches through the bore in ONE direction. 2) Next, make 10 to 15 passes with a tight fitting Bore Tech brush saturated with Rimfire Blend. 3) Then repeat Step 1 and let Rimfire Blend soak for 5 to 10 minutes. For badly fouled rifles, extended soak times may be needed. 4) Finally, push dry patches through the bore until they come out clean. 5) Repeat above steps if necessary. 6) Before storing firearm, dampen a patch with Rimfire Blend and push through bore. This will protect against rust/corrosion for up to 2 weeks under normal storage conditions. 7) For extended storage or in adverse conditions apply Bore Tech Friction Guard XP Gun Oil. 8) Before using firearm, always run a dry patch through the bore. This will remove any residue and ensure against obstructions.